CAT 1 Quick Hitch Adapter Bushing
The CAT 1 Quick Hitch Adapter Bushing is a small metal insert that is used to adjust the lower link connection point on a tractor from one size to another in order to use a different size hitch. The CAT 1 mark refers to the size of the hitch, which is a standard size commonly used for small and medium-sized agricultural tractors. For example, if a farmer has a large accessory that requires a CAT 2 hitch, but only one tractor has a CAT 1 hitch, an adapter bushing can be used. The bushing serves as a joint to allow accessories to be used with smaller hitches.
Most Cat 1 quick hitches require a bushing to be installed on the lower pin in order to adapt the accessory to the quick hitch connection. They will be installed on any 7/8-inch pin to accommodate any Cat 1 quick hitch that requires a bushing.
Function - For quick hitch systems, these bushings are used for CAT 1 (Category 1) implements and can help secure equipment accessories to be connected to the rear of the tractor.
Accessories - Suitable for Level 1 three-point tractors, compatible with Speedo John Deere Jeffers and more quick hitches. The bushing kit includes 2 quick hitch bushings and 4 roll pins.
Material - Made of high-quality steel, sturdy and durable, with a galvanized surface to ensure rust and corrosion resistance.
Easy to install - The quick hitch system is easy to install, requiring only a hammer to insert the pin shaft.
Weight 17 lbs
Available length of shoulder bushing 2-7/8 inches
The total length of the shoulder bushing is 4 inches
Why choose our adapter sleeve?
Adapter Bushing Kit for CAT 1 Quick Hitch
Quick Hitch Bushing Kit: This 3-ton bushing kit can be used to adjust the implement to install a quick hitch. Simply slide the bushing onto the lower lift pin and top link pin to reduce and eliminate spacing, resulting in a better and stronger fit.
Made of coated steel: Each sleeve will be made of galvanized steel. This coating can prevent rust and corrosion of the steel, so you don't have to worry about bushing damage over time.
Six top link pin adapters: This quick hitch bushing kit will include a total of six top link pin adapters. These adapters vary in length and thickness, allowing you to convert the top connection pins of Type 0, Type 1, and Type 2 to better fit the quick hitch.
Easy to install: Use this sleeve kit to quickly and easily install. Slide the top link bushing onto the top link pin and use the shoulder bushing on the lower lift pin. Fix the shoulder bushing in place with the attached roll pin.
Adapter bushing on a quick hitch
Adapter Bushing Kit for CAT 1 Quick Hitch
A-lock handle * 2
B Top link Lynch pin * 2
C-shaped top link pin * 2 D-shaped frame * 1
E Lower frame Lynch pin * 2
F Lower frame pin * 2 G Roll pin * 2
H-shaped sleeve * 2
I-Top Link Adapter Bracket * 1
Note: The top adapter is used to connect brush holders, lawnmowers, and other tools.
What is the difference between Category 2 and Category 3 quick hitches?
Category 2 and Category 3 hitches are two common types of hitches that are suitable for different vehicles and applications-
The Type 2 quick hitch has a pin diameter of 1.25 inches and can withstand a weight of 4000 to 6000 pounds. They are typically used for tractors or other agricultural equipment that require medium to heavy traction.
The Type 3 suspension has a large pin diameter of 1.5 inches and can withstand a weight of 6000 to 10000 pounds. They are suitable for heavy loads or equipment, such as large trailers or construction equipment.
Other differences between Category 2 and Category 3 hitches include size and weight, as well as specific types of accessories used to connect them to the equipment. It is important to choose the correct type of hitch based on the weight of the load to be towed, as using an incorrect hitch can be unsafe and present a risk of damage or accidents.
Audited Supplier 
Adapter Bushings Kit for CAT 1 Quick Hitch
){kind=link}