Suppliers with verified business licenses
Audited Supplier The forklift distance adjustment cylinder is a hydraulic component that adjusts the width or spacing between the forklift's forks. It allows the divisions to be positioned at different distances from each other to accommodate loads of various sizes.
| bore diameter (D) | rod diameter (d) | stroke (S) | Installation distance (L) | working pressure | Interface dimensions (M) | weight |
| Φ50 | Φ25 | 295 | 503 | 16MPa | 2-M16*1.5 | 7kg |
How the forklift distance adjustment cylinder typically works:
Cylinder Structure: The distance adjustment cylinder consists of a hydraulic cylinder, a piston, and a seal. The cylinder is mounted on the forklift frame, and the piston is connected to the forks or a dedicated attachment.
Hydraulic System: The forklift's hydraulic system, which includes a hydraulic pump, hydraulic fluid, and control valves, supplies the necessary hydraulic pressure to operate the cylinder.
Adjustment Control: The forklift operator uses the controls in the cabin to activate the hydraulic system and adjust the fork spacing. Operating the control valve, hydraulic fluid is directed to either side of the cylinder, causing the piston to extend or retract.
The forklift distance adjustment cylinder provides flexibility in handling loads of different widths by allowing the forks to be adjusted accordingly. It is instrumental in warehouses, distribution centers, and other material handling environments where loads of various sizes must be lifted and transported.
When selecting a forklift distance adjustment cylinder, it's essential to consider factors such as load capacity, compatibility with the forklift model, and ease of operation. Consulting the manufacturer's recommendations and specifications will help ensure the correct cylinder is chosen for the specific forklift model.
Fork Adjustment: As the piston extends or retracts, it moves the forks or the attachment, thereby adjusting the distance between the divisions. The operator can set the desired spacing based on the load's size.
Are there any specific safety considerations when operating a forklift with a distance adjustment cylinder?
Training: Ensure that forklift operators are properly trained and certified to operate the forklift with the distance adjustment cylinder. They should be familiar with the specific controls and operation of the cylinder.
Load Capacity: Be aware of the load capacity limits of the forklift, including the maximum load capacity at different fork spacing settings. Do not exceed the recommended load capacity to maintain stability and prevent accidents.
Stability: Adjust the fork spacing evenly on both sides to maintain peace and balance. Uneven fork spacing can affect the forklift's strength and increase the risk of tipping over.
Load Distribution: Ensure that the weight of the load is evenly distributed on the forks when adjusting the spacing. Improper load distribution can affect stability and cause the burden to shift or fall during operation.
Clearances: Be mindful of the increased width of the forklift when the forks are adjusted to a wider spacing. Take into account the clearance requirements for maneuvering through narrow aisles, doorways, or other restricted spaces to avoid collisions or damage.
Visibility: Adjusting the fork spacing may affect the operator's visibility, mainly when the forks are spread wide. Maintain clear visibility of the surroundings and use mirrors or cameras, if available, to monitor the area around the forklift.
Operating Surfaces: When using a forklift with the distance adjustment cylinder, pay attention to the condition of the operating surfaces. Uneven or unstable surfaces can affect the forklift's stability and increase the risk of accidents.
Regular Inspections: Conduct routine inspections of the forklift, including the distance adjustment cylinder, to identify any signs of wear, leaks, or damage. Any issues should be addressed promptly to ensure safe operation.
Follow Safety Guidelines: Adhere to all safety guidelines and procedures outlined by the forklift manufacturer and relevant safety regulations. This includes wearing appropriate personal protective equipment (PPE), following speed limits, and maintaining a safe distance from pedestrians and other equipment.
We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has four semi-automatic lifting cylinder assembly lines and one fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.
|
Forklift cylinder assembly shop
|
Other types of cylinder assembly shop
|
|
Painting & coating line
|
Fully automatic water-based
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}