Agricultural Farm Plow Tractor Spare Parts PTO Cardan Shaft Agriculture Grass Cutting Flail Lawn Mower Rotary Combine Harvester Plough Tiller Blade Disc Harrow
Product Description
Benefits of Farm Plough Tractor Spare Parts
Extended equipment life: Ploughs, especially their ground-contact parts, are subject to tremendous wear and tear due to constant contact with soil, rocks and residues. Timely replacement of worn parts prevents further damage to interconnected components, significantly extending the overall life of the plow and the tractor itself. It is a wise long-term investment.
Minimized downtime: Breakdowns during critical farming seasons, such as seeding or tillage, can result in huge financial losses due to missed opportunities. Readily available spare parts allow for quick repairs, minimize operational delays and ensure that farming activities proceed as planned.
Optimal performance and efficiency: Worn parts, such as a blunt plow tip or a deformed moldboard, reduce the efficiency of plowing operations. Replacing with high-quality spare parts ensures that the plow operates at optimal efficiency, achieving proper soil turning, aeration and residue burial, which are essential for subsequent seeding and yield.
Long-term cost savings: While investing in quality spare parts may seem like an upfront investment, it can significantly reduce the frequency of overhauls, prevent catastrophic failures, and optimize fuel consumption by maintaining efficient operation. This can result in significant long-term savings compared to letting worn parts reduce performance or cause chain damage.
Improved fuel economy: When ground-contact parts such as plow points and plowshares are sharp and correctly shaped, they cut into the soil with less resistance. This reduces the horsepower required from the tractor, thereby improving fuel efficiency.
Enhanced soil health and yields: Well-functioning plowshare parts ensure consistent soil turning and aeration, which promotes better drainage, nutrient distribution, and crop root development. This directly contributes to higher yields and improved soil health.
Safety: Worn or damaged parts can compromise the plow's structural integrity and operating safety. Replacing these parts ensures safe operation of the equipment, protecting the operator and other farm personnel.
Versatility and adaptability: Certain spare parts (e.g. different types of mouldboards or ploughshares) can be interchanged to adapt the plow's performance to different soil types (e.g. sand, clay, rock) and conditions, maximizing its effectiveness.
Application:
Farm Plow Tractor Spare Parts are specialized for various parts of the plow, especially those parts that are in direct contact with the soil or bear large loads.
Plow Bottom/Plow Body Parts (Wear Parts): These parts are the most frequently replaced parts due to direct contact with the soil.
Plow Tip (or Vomero Nose): The pointed tip at the front of the plow body that initiates soil penetration. They are the most common wear parts and are essential for cutting into the soil and protecting the plowshare.
Plowshare: The part of the bottom of the plowshare that cuts into the soil horizontally.
Moldboard: The curved surface used to lift, turn over and overturn the soil cut, thereby burying crop residues. Moldboards are available in different shapes for different soil types and residue conditions (e.g., stubble, turf, general purpose).
Plow Shank: The triangular part of the leading edge of the moldboard that receives the initial soil flow and protects the moldboard from excessive wear.
Moldboard: A flat vertical plate that runs along the furrow wall to resist the side thrust of the soil and help stabilize the plow body.
Heel: Located at the rear of the moldboard, providing additional stability.
Supports and attachments:
Coulter (disc or blade): A rotating disk or blade that cuts soil and residue in front of the plowshare, allowing for a cleaner furrow cut, especially when handling heavy loads.
Skimmer (skimmer): A small moldboard-like attachment that skims topsoil and residue and flips it to the plow base for better burial.
Plow Base: The central casting or fabricated part to which the plowshare, shank and moldboard are bolted, providing structural integrity to the plow body.
Beams and outriggers (legs): Structural components that connect the plow body to the main frame of the plow body and are used to support the stresses of the plowing process.
Brackets, bolts and fasteners: Used throughout the plow body to hold everything together and usually need to be replaced due to wear, vibration or breakage.
Frame and hitch components:
Hitch pins and bushings: Used to connect the plow body to the tractor's three-point hitch or drawbar.
Wheels (gauge wheels/tail wheels): used to support the weight of the plough body and control the plough depth. The bearings and tires of these wheels are common spare parts.
Hydraulic cylinders and hoses: used to control functions such as plough depth, plough width or the turning mechanism of reversible ploughs. Seals, hoses and hydraulic cylinder parts are common spare parts.
At Hangzhou Xinlan Agricultural Machinery Co.Ltd we are specialist in quality agri-parts like agricultural gearboxes, pto shafts, 3 points tractor attachments and skid steer and forklift implements at very competitive prices. Our range of implements includes PTO shafts, gearboxes for agricultural machinery, post hole digger, auger, tractor slashers, grader blades, spear , box scrapers,, ATV implements, agri- rippers, hydaulic cylinders, Telescopic Fork Mounted Jibs, Safety Cage etc. We have more than 30 years production experience.
Related products
Company Profile
Company Information
Audited Supplier 
){kind=link}