Worm Wheel And Worm Shaft Pinion Wheel Shaft Stainless Steel Makishinko Double Thread Enveloping Multi Start Manual Duplex Worm Wheel And Worm Shaft
There are some reasons why you might select a worm gear more than a standard gear.
The first one may be the high reduction ratio. A worm equipment can have an enormous reduction ratio with small effort - all one should do is certainly add circumference to the steering wheel. Thus you can utilize it to either significantly increase torque or help reduce speed. It'll typically consider multiple reductions of a typical gearset to attain the same reduction degree of a single worm equipment - which means users of worm gears have got fewer shifting parts and fewer areas for failure.
A second reason to employ a worm gear may be the inability to reverse the direction of power. Because of the friction between the worm and the wheel, it is virtually impossible for a wheel with force applied to it to start the worm moving.
On a standard gear, the input and output can be turned independently once enough force is applied. This necessitates adding a backstop to a standard gearbox, further increasing the complication of the gear set.
Application of Worm Wheel And Worm Shaft
Worm wheel and worm shaft are a type of gear train that consists of a worm, which is a screw-shaped gear, and a wheel, which has teeth that mesh with the worm. Worm wheel and worm shaft gears are used in a variety of applications, including:
- Lifts: Worm wheel and worm shaft gears are used in lifts to transmit power from the motor to the hoist.
- Elevators: Worm wheel and worm shaft gears are used in elevators to transmit power from the motor to the elevator car.
- Wind turbines: Worm wheel and worm shaft gears are used in wind turbines to transmit power from the blades to the generator.
- Mixers: Worm wheel and worm shaft gears are used in mixers to transmit power from the motor to the mixing bowl.
- Conveyors: Worm wheel and worm shaft gears are used in conveyors to transmit power from the motor to the conveyor belt.
- Machine tools: Worm wheel and worm shaft gears are used in machine tools, such as lathes and milling machines, to transmit power from the motor to the cutting tool.
- Robotics: Worm wheel and worm shaft gears are used in robotics to move the robot's arms and joints.
Worm wheel and worm shaft gears are a versatile type of gear train that can be used in a wide variety of applications. They are characterized by their high torque and low speed. This makes them ideal for applications where a high amount of torque is needed, such as lifting and hoisting.
Here are some of the advantages of using worm wheel and worm shaft gears:
- High torque: Worm wheel and worm shaft gears can transmit a high amount of torque. This makes them ideal for applications where a lot of force is needed, such as lifting and hoisting.
- Low speed: Worm wheel and worm shaft gears operate at a low speed. This makes them ideal for applications where noise and vibration are a concern.
- Compact size: Worm wheel and worm shaft gears are typically small and compact. This makes them ideal for applications where space is limited.
- Low cost: Worm wheel and worm shaft gears are relatively inexpensive. This makes them a good choice for budget-minded applications.
Overall, worm wheel and worm shaft gears are a versatile, efficient, and cost-effective type of gear train that can be used in a wide variety of applications.
Audited Supplier 
){kind=link}
){kind=link}